Band Pass Filter
The main purpose of the filter is to filter the frequency received by the antenna to reduce the noise received. Bandpass filter is the most commonly used type among various filters, which filters the frequency bands that are too high and too low, leaving only the center frequency of the antenna.
| Center Frequency | 5235MHz | 5697MHz | 5240MHz | 5670MHz |
| Passband Width | 150~5330 MHz | 5490~5850 MHz | 5150~5330 MHz | 5490~5850 MHz |
|
Input / Output Impedance |
50Ω | |||
| input Power max. | 1W | |||
|
Passband Insertion Loss |
2.5dB | 3.0dB | ||
|
Stop Band Attenuation |
50dB @5490~5850MHz |
50dB @5150~5330MHz |
38dB@30~2700MHz 38db@3453~3547MHz 33dB@36673883MHz 50dB@5490~5850MHz 20dB@7220~7500MHz |
38dB@30~2700MHz 38dB@3453~3574MHz 33dB@3667~3883MHz 50dB@5150~5330MHz 20dB@7220~7500MHz |
| Dimension | 8.7 x 4.2 x 3.0mm | 7.7 x 4.2 x 3.0mm | 7.7 x 4.0 x 3.0mm | |
|
Operating Temperature |
-40°C ~ +85°C | |||
